|
|
Rank: Administrator
Groups: Administration
, Member, Moderator
Joined: 9/19/2008
Posts: 1,154
Location: UK
|
What would you use with the above? a friend has aquired a pair S/H I was asked this but would be interested to read other vews/opinions. Budget £750 or so 
"Quicquid Nitet Notandum"
|
|
Rank: HIFI Novice
Groups: Member
Joined: 5/23/2009
Posts: 13
Location: Liverpool
|
Not sure if you can find one but probaly the best match I have heard with those speakers was an original Krell KSA 50 Pre . If you can find one second hand then £750 should be about right . To save on costs you can use it with a passive and this you can make yourself as a single source very easily until you can save up for a better pre amp.
|
|
Rank: HIFI Addict
Groups: Member
Joined: 3/9/2009
Posts: 142
Location: New York
|
Hi Simon, darkmatter wrote:What would you use with the above? a friend has aquired a pair S/H I was asked this but would be interested to read other vews/opinions. Budget £750 or so I know many folks (including myself) who use Outlaw 2200s with Maggies (from the MMGs, to 1.6s to 3.6s). http://www.outlawaudio.com/products/2200.htmlThe previous model 200 might also be found on the used market. (The only difference, I believe, is the option for balanced inputs on the newer model.) These deliver 200 wpc into 8 ohms and 300 wpc into the Maggies' 4 ohm load. Best regards, Barry www.soundkeeperrecordings.comwww.barrydiamentaudio.com
|
|
Rank: Administrator
Groups: Administration
, Member, Moderator
Joined: 9/19/2008
Posts: 1,154
Location: UK
|
bdiament wrote:Hi Simon, darkmatter wrote:What would you use with the above? a friend has aquired a pair S/H I was asked this but would be interested to read other vews/opinions. Budget £750 or so I know many folks (including myself) who use Outlaw 2200s with Maggies (from the MMGs, to 1.6s to 3.6s). http://www.outlawaudio.com/products/2200.htmlThe previous model 200 might also be found on the used market. (The only difference, I believe, is the option for balanced inputs on the newer model.) These deliver 200 wpc into 8 ohms and 300 wpc into the Maggies' 4 ohm load. Best regards, Barry www.soundkeeperrecordings.comwww.barrydiamentaudio.com Thanks Barry, as these are available to him, I will forward this suggestion on Regards, Simon
"Quicquid Nitet Notandum"
|
|
|
Guest |
